Fast Order: Refurb Kwikstage Items

Standards are used for upright support, they can be joined vertically to increase the scaffolds height.

V-pressings along their length are used to connect Transoms and Ledgers, they are also used to hold Hop-Up Brackets.

Colour may vary.

Standards are used for upright support, they can be joined vertically to increase the scaffolds height.

V-pressings along their length are used to connect Transoms and Ledgers, they are also used to hold Hop-Up Brackets.

Colour may vary.

Ledgers are used to tie the uprights/standards along the length of the scaffold.

They are also used as to form the guard rail.

Ledgers have a wedge fixing that is located into the V-pressing on the standards.

Colour may vary.

Ledgers are used to tie the uprights/standards along the length of the scaffold.

They are also used as to form the guard rail.

Ledgers have a wedge fixing that is located into the V-pressing on the standards.

Colour may vary.

The 4'2 Transom is used between the standards giving width to form a rigid bay with the ledgers.

They also form the upside down "T" section that the Battens or Steel Stage locate onto.

Other sizes are available to fit into restricted access. 

Colour may vary.

The 2'8" Transom is used where access is restricted, giving a 3 board wide work area.

They locate between the standards giving width to form a rigid bay with the ledgers.

They also form the upside down "T" section that the Battens or Steel Stage locate into.

Colour may vary.

12' Diagonal Braces are used on 8ft bays.

They fit onto the elevation or face of the scaffold to "lock" the Standards and Ledgers into a rigid bay and also remove any "sway" in the scaffold.

For house building it is good practice to have one brace on every fourth bay and zig-zag up the face of the scaffold.

Colour may vary. 

Hop-Up Brackets enable work to take place away from the main scaffold run.

They are available in 1, 2 and 3 board widths.

Hop-Up Brackets are also very usefull if the building is to be rendered as they can be in place on construction but removed for the rendering giving the workers easy access.

2 Board and 3 Board Hop-Up Brackets require Tie Bars.

Colour may vary.

Hop-Up Brackets enable work to take place away from the main scaffold run.

They are available in 1, 2 and 3 board widths.

Hop-Up Brackets are also very usefull if the building is to be rendered as they can be in place on construction but removed for the rendering giving the workers easy access.

2 Board and 3 Board Hop-Up Brackets require Tie Bars.

Colour may vary.

Ladder Access Transoms are used where a ladder access/Trap Door is required inside a bay.

The Ladder Access Transom is located between the two ledgers, this is placed approx 64" from the previous transom.

To be used with a Safety Trap Door, a single section vertical ladder is held in place with 4 nos Metal Ladder Clamp.

We recommend that you used 2 nos 64" Battens, the remaining space is filled with 3 nos standard 8ft battens.

Colour may vary.