| Part No |
Image |
Description |
Price (Exc. VAT) |
Price (Inc. VAT) |
Qty |
|
39032
|
|
Used 9'9"Kwikstage Standard
Standards are used for upright support, they can be joined vertically to increase the scaffolds height.
V-pressings along their length are used to connect Transoms and Ledgers, they are also used to hold Hop-Up Brackets.
Colour may vary.
Show Description
|
£17.50
|
£21.00
|
|
|
39015
|
|
Used 6'6" Kwikstage Standard
Standards are used for upright support, they can be joined vertically to increase the scaffolds height.
V-pressings along their length are used to connect Transoms and Ledgers, they are also used to hold Hop-Up Brackets.
Colour may vary.
Show Description
|
£10.00
|
£12.00
|
|
|
39059
|
|
Used 4'10" Kwikstage O.E. Standard
Open Ended Standards are used for upright support, they can accept Adjustable U - Heads etc.
V-pressings along thier length are used to connect Transoms and Ledgers.
Colour may vary.
Show Description
|
£5.00
|
£6.00
|
|
|
39014
|
|
Used 8' Kwikstage Ledger
Ledgers are used to tie the uprights/standards along the length of the scaffold.
They are also used as to form the guard rail.
Ledgers have a wedge fixing that is located into the V-pressing on the standards.
Colour may vary.
Show Description
|
£10.00
|
£12.00
|
|
|
39028
|
|
Used 6' Kwikstage Ledger
Ledgers are used to tie the uprights/standards along the length of the scaffold.
They are also used as to form the guard rail.
Ledgers have a wedge fixing that is located into the V-pressing on the standards.
Colour may vary.
Show Description
|
£6.00
|
£7.20
|
|
|
39022
|
|
Used 4' Kwikstage Ledger
Ledgers are used to tie the uprights/standards along the length of the scaffold.
They are also used as to form the guard rail.
Ledgers have a wedge fixing that is located into the V-pressing on the standards.
Colour may vary.
Show Description
|
£8.00
|
£9.60
|
|
|
39016
|
|
Used 4'2" Kwikstage Transom
The 4'2 Transom is used between the standards giving width to form a rigid bay with the ledgers.
They also form the upside down "T" section that the Battens or Steel Stage locate onto.
Other sizes are available to fit into restricted access.
Colour may vary.
Show Description
|
£10.00
|
£12.00
|
|
|
39026
|
|
Used 12' Kwikstage Diagonal Brace
12' Diagonal Braces are used on 8ft bays.
They fit onto the elevation or face of the scaffold to "lock" the Standards and Ledgers into a rigid bay and also remove any "sway" in the scaffold.
For house building it is good practice to have one brace on every fourth bay and zig-zag up the face of the scaffold.
Colour may vary.
Show Description
|
£10.00
|
£12.00
|
|
|
39051
|
|
Used 9' Kwikstage Diagonal Brace
9' Diagonal Braces are used on 6ft bays.
They fit onto the elevation or face of the scaffold to "lock" the Standards and Ledgers into a rigid bay and also remove any "sway" in the scaffold.
For house building it is good practice to have one brace on every fourth bay and zig-zag up the face of the scaffold.
Colour may vary.
Show Description
|
£8.00
|
£9.60
|
|
|
39034
|
|
Used 6' Kwikstage Diagonal Brace
Used as a plan brace across the width of the scaffold, usually where great loads are to be used over many levels.
Colour may vary.
Show Description
|
£7.00
|
£8.40
|
|
|
39029
|
|
Used Kwikstage Toe Board Bracket
Used to hold Battens at right angles to the platform to form a toe board.
Colour may vary.
Show Description
|
£1.00
|
£1.20
|
|
|
39099
|
|
Used Kwikstage End Toe Board Bracket
Used as per a Toe Board Bracket but this item is specially shaped to form an end toe board against the end of a scaffold run.
Colour may vary.
Show Description
|
£1.00
|
£1.20
|
|
|
39018
|
|
Used Kwikstage 3 Board Hop-Up Bracket
Hop-Up Brackets enable work to take place away from the main scaffold run.
They are available in 1, 2 and 3 board widths.
Hop-Up Brackets are also very usefull if the building is to be rendered as they can be in place on construction but removed for the rendering giving the workers easy access.
2 Board and 3 Board Hop-Up Brackets require Tie Bars.
Colour may vary.
Show Description
|
£7.00
|
£8.40
|
|
|
39019
|
|
Used Kwikstage 2 Board Hop-up Brackets
Hop-Up Brackets enable work to take place away from the main scaffold run.
They are available in 1, 2 and 3 board widths.
Hop-Up Brackets are also very usefull if the building is to be rendered as they can be in place on construction but removed for the rendering giving the workers easy access.
2 Board and 3 Board Hop-Up Brackets require Tie Bars.
Colour may vary.
Show Description
|
£5.00
|
£6.00
|
|
|
39041
|
|
Used Kwikstage 1 Board Hop-up Bracket
Hop-Up Brackets enable work to take place away from the main scaffold run.
They are available in 1, 2 and 3 board widths.
Hop-Up Brackets are also very usefull if the building is to be rendered as they can be in place on construction but removed for the rendering giving the workers easy access.
2 Board and 3 Board Hop-Up Brackets require Tie Bars.
Colour may vary.
Show Description
|
£3.50
|
£4.20
|
|
|
39020
|
|
Used 8' Kwikstage Tie Bar
Tie Bars are located between the Hop-Up Brackets.
They keep each bracket at an equal and square distance from each other.
Available in 4ft, 6ft and 8ft.
Colour may vary.
Show Description
|
£5.00
|
£6.00
|
|
|
39033
|
|
Used 6' Kwikstage Tie Bar
Tie Bars are located between the Hop-Up Brackets.
They keep each bracket at an equal and square distance from each other.
Available in 4ft, 6ft and 8ft.
Colour may vary.
Show Description
|
£4.00
|
£4.80
|
|
|
39027
|
|
Used 4' Kwikstage Tie Bar
Tie Bars are located between the Hop-Up Brackets.
They keep each bracket at an equal and square distance from each other.
Available in 4ft, 6ft and 8ft.
Colour may vary.
Show Description
|
£4.00
|
£4.80
|
|
|
39024
|
|
Used 2 Board Internal Corner Filler
The Internal Corner Filler is used in conjunction with Hop-Up Brackets.
They fill the gap of the internal corners of a scaffold structure.
Colour may vary.
Show Description
|
£20.00
|
£24.00
|
|
|
39044
|
|
Used Kwikstage 16ft Bridging Ledger
Used in pairs to bridge over doorways etc.
Handrail Posts must be used with the Bridging Ledger.
Care should be taken for any erection on top of the bridging ledgers.
The bridging ledger should not be used to form a load bearing structure, if you require to be able to build above the bridge then beams should be used instead.
Colour may vary
Show Description
|
£50.00
|
£60.00
|
|
|
39541
|
|
Used Kwikstage Handrail Post
To be used with a 16ft bridging ledger to form a handrail.
Colour may vary.
Show Description
|
£10.00
|
£12.00
|
|
|
29045
|
|
Used Kwikstage Steel Staircase Unit c/w Handrails
Used to form a stairway in an 8ft bay to reach a platform height of 6ft.
Comes complete with with two double handrails.
Each stair unit is approx 0.8m wide and fits into a 2'8 transom or two units fit onto a 4'2 transom, can be used in either direction.
Locating clips included.
Show Description
|
£150.00
|
£180.00
|
|
|
39045
|
|
Used Kwikstage Alloy Staircase Unit c/w Handrails
Used to form a stairway in an 8ft bay to reach a platform height of 6ft.
Comes complete with with two double handrails.
Each stair unit is approx 0.8m wide and fits into a 2'8 transom or two units fit onto a 4'2 transom, can be used in either direction.
Locating clips included.
Show Description
|
£250.00
|
£300.00
|
|
|
39165
|
|
Used Galvanised Kwikstage Loading Bay Gates - Pair
Use to form a loading bay within an 8ft x 8ft tower
These Gates open inwards.
An up & Over Handrail should also be used for safety.
Show Description
|
£50.00
|
£60.00
|
|
|
39010
|
|
Used 8' Kwikstage Loading Bay Transom
Used to form a loading bay within an 8ft x 8ft tower.
You will require the following items to build a loading bay...
- 2 nos Loading Bay Transoms
- 10 nos Steelstage
- 1 nos Up & Over Gate
Colour may vary.
Show Description
|
£40.00
|
£48.00
|
|
|
39527
|
|
Used Kwikstage Ladder Access Transom
Ladder Access Transoms are used where a ladder access/Trap Door is required inside a bay.
The Ladder Access Transom is located between the two ledgers, this is placed approx 64" from the previous transom.
To be used with a Safety Trap Door, a single section vertical ladder is held in place with 4 nos Metal Ladder Clamp.
We recommend that you used 2 nos 64" Battens, the remaining space is filled with 3 nos standard 8ft battens.
Colour may vary.
Show Description
|
£14.00
|
£16.80
|
|
|
39525
|
|
Used Kwikstage 2'8" Ladder Access Transom
Ladder Access Transoms are used where a ladder access/Trap Door is required inside a bay.
The Ladder Access Transom is located between the two ledgers, this is placed approx 64" from the previous transom.
To be used with a Safety Trap Door, a single section vertical ladder is held in place with 4 nos Metal Ladder Clamp.
Colour may vary.
Show Description
|
£12.50
|
£15.00
|
|
|
31010
|
|
Used Screw Jack
Screw Jacks locate in the bottom of the standards, they provide adjustment for variations in ground levels.
Approx 38mm OD.
Plate approx 150 x 150 x 5mm.
Colour/style may vary.
Show Description
|
£5.00
|
£6.00
|
|
|
37777
|
|
Secondhand Stillage
Scaffold Stillage to hold either standard scaffolding and/or Kwikstage or Cuplok items.
Designed to stack together, will fit on top of fitting bins.
- Standard Size
- Fits on/under Fitting Bins
- Robust Construction
Show Description
|
£40.00
|
£48.00
|
|
|
10967
|
|
New Safety Gate Side Panel
After recognised construction industry feedback, we are now delighted to offer the LH / RH side panel to enable a standard self closing gate to be used on the end of a Cuplok bay ie 1.3m width.. or a kwikstage bay ie 4'2 width.
- Double Handrail Depth
- Painted Finish
- Can be used RH or LH Side
- Steel Toe Board
- Fully Meshed
- Works with standard and omega cuplok system
- Works with kwikstage
- System Compatible, with additional components.
- Used with Gate Size: 750 x 960mm( not included )
- Weight: 10 Kgs
Show Description
|
£49.00
|
£58.80
|
|
|
39011
|
|
Used 8ft Bow String Transom
Use to form an 8ft bay within a 8ft x 8ft tower.
Show Description
|
£15.00
|
£18.00
|
|
|
39013
|
|
Used 8ft Kwikstage Transom
Use to form an 8ft bay within a 8ft x 8ft tower.
Show Description
|
£15.00
|
£18.00
|
|
|
39012
|
|
Used 6ft Kwikstage Transom
Use to form a 6ft bay within a 6ft x 6ft tower.
Show Description
|
£12.50
|
£15.00
|
|
|
19030
|
|
New 1 Board Internal Corner Filler
The Internal Corner Filler is used in conjunction with Hop-Up Brackets.
They fill the gap of the internal corners of a scaffold structure.
Colour may vary.
Show Description
|
£22.50
|
£27.00
|
|
|
29527
|
|
Refurbished Kwikstage Ladder Access Transom
Ladder Access Transoms are used where a ladder access/Trap Door is required inside a bay.
The Ladder Access Transom is located between the two ledgers, this is placed approx 64" from the previous transom.
To be used with a Safety Trap Door, a single section vertical ladder is held in place with 4 nos Metal Ladder Clamp.
We recommend that you used 2 nos 64" Battens, the remaining space is filled with 3 nos standard 8ft battens.
Colour may vary.
Show Description
|
£16.00
|
£19.20
|
|
|
11001
|
|
New Galvanised Spigot c/w Nuts & Bolts
Galvanised Spigots for Standards/uprights.
Used as a replacement for damaged/missing spigots in standards.
Compatible with both Cuplok & Kwikstage.
Complete with nuts & bolts.
Show Description
|
£2.95
|
£3.54
|
|
