Fast Order: Ancillaries

After recognised construction industry feedback, we are now delighted to offer the LH / RH closing gate.

• Double Handrail Depth
• Steel Toe Board
• Fully Meshed
• System Compatible, with additional components.
• Gate Size: 600 x 960mm - size may vary.
• Distance between standards: 780mm Approx
• Please have gate available on site before erecting standards/posts
• Presco type half coupler fastening
• Weight: 12 Kgs

Used as a safety trap door, a ladder access transom is used on the scaffold to form a " hole / opening " that a worker can climb through. The safety trapdoor is held in place by adjustable clamps held against the toeboards.

• Fits on Kwikstage
• Fits on Scaflok / Cuplok
• A ladder access transom will also be required.
• Fitting details available on the download
  
• Colour may vary
• Mesh size: 58 x 71cm (may vary)
  

Design may vary.

After recognised construction industry feedback, we are now delighted to offer the LH / RH side panel to enable a standard self closing gate to be used on the end of a Cuplok bay ie 1.3m width.. or a kwikstage bay ie 4'2 width.

• Double Handrail Depth
• Painted Finish
• Can be used RH or LH Side
• Steel Toe Board
• Fully Meshed
• Works with standard and omega cuplok system
• Works with kwikstage
• System Compatible, with additional components.
• Used with Gate Size: 750 x 960mm( not included )
  
• Weight: 10 Kgs

For use on tube, board & fitting scaffolds. After recognised construction industry feedback, we are now delighted to offer the Up & Over Loading Bay Gate for use with tube, boards and fittings.

• Double Handrail Depth
• Fully Meshed
• Tube, Board & Fitting  Compatible, with additional components.
• Gate Size: 3200 x 1000mm - size may vary.
  
• Please have gate available on site before erecting standards/posts
  
• Weight: 120 Kgs

Screw Jacks locate in the bottom of the standards, they provide adjustment for variations in ground levels.

Safe working load of approx 4 tons each.

Approx 38mm OD.

Plate approx 150 x 150 x 5mm.

Screw Jacks locate in the bottom of the standards, they provide adjustment for variations in ground levels.

Safe working load of approx 6 tons each.

Approx 38mm OD

Plate approx 150 x 150 x 6mm.

Swivel Base Screw Jacks locate in the bottom of the standards, they provide adjustment to cope with variations in ground levels, and they have the ability to swivel to cope with slopes etc.

Safe working load of approx 6 tons.

Approx 38mm OD.

Plate approx 150 x 150 x 6mm.

Screw Jacks locate in the bottom of the standards, they provide adjustment for variations in ground levels.

Overall Length: 205mm

Adjustable Range: 120mm

Safe working load of approx 4 tons each.

Approx 38mm OD.

Plate approx 150 x 150 x 5mm.

Screw Jacks locate in the bottom of the standards, they provide adjustment for variations in ground levels.

Overall Length: 315mm

Adjustable Range: 215mm

Safe working load of approx 4 tons each.

Approx 38mm OD.

Plate approx 150 x 150 x 5mm.

Tube Castor for fitting onto standard scaffold tube and/or Kwikstage, this type of castor will not fit Cuplok system scaffolding.

• Braked
• Rubber Tyre
• 8" - 200mm
• SWL - 535kg

Used to provide a mesh barrier along between the scaffold handrail and toe board. Plastic Brick Guards prevent debris etc from falling off a scaffold, they are approx 1.0m in length.

• Size: 110 width x 84cm high
• No hooks to attach count or lose!
• Complete one-piece construction with no separate parts.
• No additional fixings required.
• Built in toe board clip prevents movement, even in high winds.
• No more creasing, fracturing or hooks falling off. 
• High grade impact modified polypropylene for durability and flexibility.

• Easy to stack. Easy to separate. Anti-tangle guaranteed!
• Vertical stacking design with four way stay-fast alignment.
• Great for storage, delivery and movement around site!
• Interlocking features maximise stability.
• Make every job stand out from the competition!
• Wide range of colours in stock and pantone colour matching available.
• Max Unique hook design!
• Reduces accidental displacement.

Used to provide a mesh barrier along between the scaffold handrail and toe board. Plastic Brick Guards prevent debris etc from falling off a scaffold, they are approx 1.0m in length.

• Size: 110 width x 84cm high
• No hooks to attach count or lose!
• Complete one-piece construction with no separate parts.
• No additional fixings required.
• Built in toe board clip prevents movement, even in high winds.
• No more creasing, fracturing or hooks falling off. 
• High grade impact modified polypropylene for durability and flexibility.

• Easy to stack. Easy to separate. Anti-tangle guaranteed!
• Vertical stacking design with four way stay-fast alignment.
• Great for storage, delivery and movement around site!
• Interlocking features maximise stability.
• Make every job stand out from the competition!
• Wide range of colours in stock and pantone colour matching available.
• Max Unique hook design!
• Reduces accidental displacement.

Used to provide a mesh barrier along between the scaffold handrail and toe board. Plastic Brick Guards prevent debris etc from falling off a scaffold, they are approx 1.0m in length.

• Size: 110 width x 84cm high
• No hooks to attach count or lose!
• Complete one-piece construction with no separate parts.
• No additional fixings required.
• Built in toe board clip prevents movement, even in high winds.
• No more creasing, fracturing or hooks falling off. 
• High grade impact modified polypropylene for durability and flexibility.

• Easy to stack. Easy to separate. Anti-tangle guaranteed!
• Vertical stacking design with four way stay-fast alignment.
• Great for storage, delivery and movement around site!
• Interlocking features maximise stability.
• Make every job stand out from the competition!
• Wide range of colours in stock and pantone colour matching available.
• Max Unique hook design!
• Reduces accidental displacement.

Used to provide a mesh barrier along between the scaffold handrail and toe board. Plastic Brick Guards prevent debris etc from falling off a scaffold, they are approx 1.0m in length.

• Size: 110 width x 84cm high
• No hooks to attach count or lose!
• Complete one-piece construction with no separate parts.
• No additional fixings required.
• Built in toe board clip prevents movement, even in high winds.
• No more creasing, fracturing or hooks falling off. 
• High grade impact modified polypropylene for durability and flexibility.

• Easy to stack. Easy to separate. Anti-tangle guaranteed!
• Vertical stacking design with four way stay-fast alignment.
• Great for storage, delivery and movement around site!
• Interlocking features maximise stability.
• Make every job stand out from the competition!
• Wide range of colours in stock and pantone colour matching available.
• Max Unique hook design!
• Reduces accidental displacement.

Used to provide a mesh barrier along between the scaffold handrail and toe board. Plastic Brick Guards prevent debris etc from falling off a scaffold, they are approx 1.0m in length.

• Size: 110 width x 84cm high
• No hooks to attach count or lose!
• Complete one-piece construction with no separate parts.
• No additional fixings required.
• Built in toe board clip prevents movement, even in high winds.
• No more creasing, fracturing or hooks falling off. 
• High grade impact modified polypropylene for durability and flexibility.

• Easy to stack. Easy to separate. Anti-tangle guaranteed!
• Vertical stacking design with four way stay-fast alignment.
• Great for storage, delivery and movement around site!
• Interlocking features maximise stability.
• Make every job stand out from the competition!
• Wide range of colours in stock and pantone colour matching available.
• Max Unique hook design!
• Reduces accidental displacement.

Folds flat for easy transportation

Height adjustable to suit tube & fitting and system scaffolding (3 x height adjustments)

Weighs only 7.4kg

Locks onto scaffold tube

Meets requirements of NASC code of practice

Aluminum anti-slip work platform

ScaffGap is supplied in 2mtr lengths in white.

Scaffgap is wide enough to cover the gap and strong enough to stand on. It simply slots into place without lifting any boards.

It can be reused and it complies with the Work at Height Regulations and industry best practice.

Ginn Wheel used to hoist materials up onto scaffold.

Manufactured in accordance with BS1692.

Test certificate supplied with each Ginn Wheel.

Rope sold seperately.

Sisal Rope used to hoist materials up onto scaffold.

Ginn Wheel supplied seperately.

Rope Size: 20m length x 24mm dia

Fully Certified.

Rope Size: 20m length x 18mm diameter

Rope Size: 20m length x 6mm diameter

Single Tube Type anchor system

Can to be used on good brick / solid walls / floors, and also timber frames ( subject to suitability )

• Standard tube size for easy use with most scaffold fittings
  
• Can be fixed with M12 Excalibur 20mm Hex Head Bolts
• Standard wood screws and washers can be used on timber frames
• Tested to 20KN force
• Twin Tube version also available
• Approx Tube Length: 300mm

Please Note: All fixings MUST be checked for " pull " strength.     

Rawplugs are not required with Excalibur fixings

Double Tube Type anchor system

Can to be used on good brick / solid walls / floors, and also timber frames ( subject to suitability )

• Standard tube size for easy use with most scaffold fittings
  
• Can be fixed with Excalibur 20mm Hex Head Bolts
• Standard wood screws and washers can be used on timber frames
• Tested to 20KN force
• Single Tube version also available
• Approx Tube Length: 300mm each
  

Please Note: All fixings MUST be checked for " pull " strength.     

Rawplugs are not required with Excalibur fixings

For use with Single and Double Tube Type anchor system

Can to be used on good brick / solid walls / floors, and also timber frames (subject to suitability)

• Thunderbolt 19mm Hex Head Bolts - sold seperately
  
• M12 x 100mm
• M12 / 12mm drill bit required
• Sizes on download

Please Note: All fixings MUST be checked for " pull " strength.     

Rawlplugs are not required with Thunderbolt fixings

Hilti type ring used to "tie" scaffolds to buildings

• Galvanised
• Anchor is required for fixing
• SDS Drill bit available

Anchors for use with Hilti Rings.

Only to be used on good brick / solid walls / floors.

M16 Fitting

For Use With Hilti Anchor

Used to form temporary staircase, fully adjustable to any angle / rake and are left or right handed.

• Tread Size 900 mm x 230 x 45mm
• 2 nos 100mm fixing tubes at each end
• Can be fitted with double couplers
• Colour / Finish may vary.

Used to form temporary staircase, fully adjustable to any angle / rake and are left or right handed.

• Tread Size 1200 mm x 230 x 45mm
• 2 nos 100mm fixing tubes at each end
• Can be fitted with double couplers
• Colour / Finnish may vary.

Scafftag Safety System, used worldwide as an inspection/fit for use type safety system.

Each kit contains:

• 10 Holders
• 20 Inserts
•   1 Pen

Laddertag Safety System, used worldwide as an inspection / fit for use type safety system.

Each kit contains:

• 10 Holders
• 10 Inserts
• 1 Pen

Used to secure and safely fix a ladder to a scaffold.

To be used in pairs.

3.0mm diameter wire c/w sealed ends.

Fittings bags with 30kg S.W.L. printed on. 

Ideal for use on site where Health and Safety requires lifting bags to be  stamped with S.W.L.

Holds approx 20 / 25 fittings - 30kg max 

We have these manufactured and tested in the UK.

You can download the batch test certificate, they failed at 1200kgs, thats a safety factor of 40:1, most other bags are only 6:1

Easi Fix Transoms can be used for most scaffolding equipment, Its purpose is to
provide a solid strength for the joints on the corners.

Easy fix transom needs only four bolts for secure placement of each unit and can be
used with flat base plates, avoiding any need for modifications or adjustments.

Easi Fix Transoms can be used for most scaffolding equipment , Its purpose is to provide a solid strenght for the joints on the corners.

Easy fix transom needs only four bolts for secure placement of each unit, and can be used with flat base plates, avoiding any need for modifications or adjustments.

Extendable Easi Fix Transoms provide a unique solution for the creation of
boarded platforms within traditional tube & fitting scaffolds.

This new innovative, simple but extremely effective tube lifting clamp is a further development in lifting safety and has been designed as a result of speaking with many scaffolding contractors about the issues faced every day in lifting scaffold tube relying on rope to secure it.

The BIG BEN TubeLift™ ensures each tube is securely clamped whilst raised and lowered.

• SWL 50kg

• Individually serial numbered

• Can lift 1, 2 or 3 tubes at a time.

Six hole shear tie bracket with drop forged fitting
Use for applications where raking scaffolding away from structures is required
Use for punching tubes vertically or horizontally along a wall
For use in edge protection applications
Use in applications to support aluminium and steel beams
The rear of a scaffold tube will be 68 mm from the face of the structure.
In most applications use only two 12 mm fixing for a high load capacity into concrete, brick and blockwork.
Supplied in a zinc finish.

Dimensions:
Plate
AST8: 185x185x8 mm; Box section: 50x50x5 mm
Hole spacing’s
The corner holes are 150 mm apart horizontally and vertically.
The 2 no. 14 mm holes centrally positioned = 92.5 mm from the furthest edges
Fitting details
Drop forged fitting independently tested with minimum slip rating of 19 kN.
Slip rating of the drop forged fitting
The fitting complies with BS5973:1993 as a Class A fitting with a safe working slip load of 6.1 kN

Scaffold Stillage to hold either standard scaffolding and/or Kwikstage or Cuplok items.

Designed to stack together, will fit on top of fitting bins.

• Standard Size
• Fits on/under Fitting Bins
• Robust Construction
• Square Leg
• SWL 1.4 tons
• Can stack 6 high

CONDITION MAY VARY

Scaffold Stillage to hold either standard scaffolding and/or Kwikstage or Cuplok items.

Designed to stack together, will fit on top of fitting bins.

• Standard Size
• Fits on/under Fitting Bins
• Robust Construction

Scaffold Bin to hold scaffold fittings and/or Kwikstage or Cuplok items.

Designed to stack together, will fit on top of stillages or fitting bins.

• 940cm x 940cm. 645cm Overall Height, 380cm Internal Height
• Fits on/under Fitting Bins or Stillages
• Robust Construction
• SWL 1.0 ton
• Can stack 6 high
• Please note that these bins are once used.
  

Scaffold Stillage to hold either standard scaffolding and/or Kwikstage or Cuplok items.

Designed to stack together, will fit on top of fitting bins.

• Standard Size
• Fits on/under Fitting Bins
• Robust Construction
• Square Leg
• SWL 1.4 tons
• Can stack 6 high

Painted Black

Lightweight steel frame for displaying customers own sign boards.

Signboard not included.

Lightweight steel frame for displaying customers own sign boards.

Signboard not included.

Friction Clamps are used where a scaffold needs to be erected from a round pipe,  they are used in off shore applications

Please note that the price does NOT include the cost of H.T. Chain or fitting/testing

H.T. Chain is £ 12.00 / mtr

Fitting / Testing is £ 20.00 ea

For further info please contact the office by email,  let us know the diametre of pipe that they are to be used on.

Used to form temporary staircase, fully adjustable to any angle / rake and are left or right handed.

• Tread Size 1050mm x 230 x 45mm
• 2 nos 100mm fixing tubes at each end
• Can be fitted with double couplers
• Colour / Finnish may vary.