Tree Protection - BS 5837
Please Note: Some sketches of BA5837 show a mid-rail/tube, this will only be required if using weld mesh for the fence, if using standard Herras type site panels the mid rail is not necessary
Length of run in meters equals " a "
" a " x 5.13m of Tube ( 16.83ft )
" a " x 0.66 Swivel Couplers
" a " x 1.00 Double Couplers
" a " x 0.45 Sleeve Couplers
You will also require some form of mesh panel, this can be either standard site panels, each panel being approx 3.6m long, or the use of reinforced mesh or chicken wire etc which is then wired into place. It is not usual to have three horizontal tubes, two will be sufficient for use with standard site fence panels.
250 x 5.13 = 1282m Scaffold Tube
250 x 0.66 = 165 nos Swivel Couplers
250 x 1.00 = 250 nos Double Couplers
250 x 0.45 = 113 nos Sleeve Couplers
You will also require 69 nos Fence Panels c/w 2 clips each.
You will need to cut the tube to size on site, usually with a Stihl saw. Extra Double Couplers are included to enable going around tree groups etc.
All prices for this equipment can be found in our 'Price List' menu.
You can download the British Standard Drawing below: